VA Class A Contractor #2705190126 DCJS #11-20830 Licensed & Insured
804-445-9674  |  Serving all of Virginia
Elite Connect LLCLow Voltage · Security

NFPA 72 · NEC Art. 760 · FAS licensed · permit + AHJ acceptance test

Commercial Fire Alarm Systems

Elite Connect holds a Virginia Class A contractor license with the Fire Alarm Systems (FAS) specialty, so we can design, permit, install and service commercial fire alarm systems ourselves rather than sub them out. Work is built to NFPA 72 and the Virginia Statewide Fire Prevention Code, permitted with the local AHJ, and tested with the inspector present.

Technician servicing a commercial fire alarm control panel beside a horn/strobe

What’s included

  • Fire alarm design and shop drawings for permit submittal
  • Battery and voltage-drop calculations
  • Permit application and AHJ coordination
  • Initiating devices: smoke, heat, duct, pull stations, waterflow and tamper
  • Notification appliances with candela spacing per NFPA 72 and ADA
  • Panel, communicator and monitoring setup
  • Acceptance testing with the fire marshal present
  • Record of completion, as-builts and annual inspection service
NFPA 72NEC Art. 760FAS licensedpermit + AHJ acceptance test

Licensed for it, and permitted properly

Fire alarm is the one low-voltage trade where the paperwork is as load-bearing as the wire. A system that works but was never permitted or never had a record of completion is a system that fails your next inspection, your insurance review, or your certificate of occupancy.

We pull the permit, submit the drawings and battery calculations, install to the approved set, and stand the acceptance test with the fire marshal. You get the record of completion, the as-built and the test documentation, the package that proves the system is legal.

Inspection, testing and the annual you have to do anyway

NFPA 72 requires periodic inspection and testing, and the AHJ will ask for the record. We perform annual inspections, device testing and battery replacement, and we deliver the documentation in the format your fire marshal actually accepts.

If you inherited a building with a panel nobody understands and a trouble light nobody has cleared, that is a normal call for us. We map what is there before quoting a replacement.

Specification

What we build to, and what we build with

Standards and performance

Code basisNFPA 72 National Fire Alarm and Signaling Code
State codeVirginia Statewide Fire Prevention Code / USBC
LicenseVirginia Class A #2705190126, FAS specialty
WiringNEC Article 760 fire alarm circuits, FPLR/FPLP as required
SurvivabilityCircuit integrity cable where the occupancy requires it
Standby power24-hour standby plus 5 minutes alarm, calculated and documented
TestingAcceptance test and periodic inspection per NFPA 72 Chapter 14

Equipment we install

PanelsAddressable and conventional commercial fire alarm control panels, sized to the building
InitiationPhotoelectric smoke, heat, duct detectors, manual pull stations, waterflow and tamper switches
NotificationHorn/strobes and speaker/strobes, candela-rated and spaced to code
CommunicationCellular and IP alarm communicators to a UL-listed monitoring center
Lines we install
Honeywell✓ ResideoQolsysGenesis CableWiremold

✓ = we hold an authorized dealer relationship

Questions

Commercial Fire Alarm Systems: common questions

Are you licensed to install fire alarm systems in Virginia?

Yes. Elite Connect LLC holds Virginia Class A contractor license #2705190126 with both the Electronic/Communication Service (ESC) and Fire Alarm Systems (FAS) specialties, and is registered with Virginia DCJS (#11-20830).

Do you pull the fire alarm permit?

Yes. We prepare the drawings and calculations, submit for permit, and coordinate the acceptance test with the local fire marshal. A permitted, inspected and documented system is the deliverable, not just working devices.

Can you inspect a system another company installed?

Yes. We perform NFPA 72 annual inspections and testing on existing systems, and we will give you a written deficiency list rather than a vague recommendation to replace everything.

How long does a commercial fire alarm project take?

Permit review is usually the long pole, not the install. We give you a schedule that separates permit time, rough-in, trim and inspection so you can plan the rest of the job around it.

Get a free consult for fire alarm systems

We walk the site, scope it honestly and put it in writing. No charge.

Or send us the details. It takes about a minute →

Call now Free consult